Heat Detector Testing

Functional checking of heat detectors, with a genuine heat source, is now required by major national standards around the world. Testing with heat sources not designed for the purpose can be both dangerous and damaging. The Solo range of heat detector testing equipment, designed specifically for the purpose, provides a genuine professional’s solution.

 

Solo 461 Cordless Heat Detector Tester (battery powered)

Using the unique IR activation and Cross Air Technology, the Solo 460 heat generation process takes place only when the detector under test is within the cup with hot air blown horizontally in a focussed beam directly toward the sensor for optimum energy use and results. Interchangeable NiMH battery batons and a fast battery recharger enable testing all day with a cable free professional device.

  • Detector manufacturer endorsed
  • No cables, trailing leads or hanging wires
  • Battery powered (Kits include 1 or 2 higher capacity (3000mAh) Battery Batons, and UL-listed fast charger with mains and in-vehicle power leads)
  • Suits fixed temperature, rate-of-rise and combination detectors up to 194°F / 90°C
  • Lightweight and simple to use
  • Universal design suits widest range of detectors
  • Transparent test cup for clear view of detector LED
  • Designed for use at height, angles or low level

Solo kits are being updated to use the NEW higher-capacity battery batons (Solo770) to give longer, un-interrupted testing which increases on-site productivity. The fast charger has also been updated (Solo727) and continues to fully charge a Solo770 battery baton in 60 to 90 minutes (when completely discharged). 

For more information, open the Product Datasheet below or refer to the product update

Solo 423 / 424 Heat Detector Tester (110 -> 240V)

Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals’ choice where cables and leads are acceptable. Unconstrained by energy availability they provide the quickest of test times and are, perhaps, most suitable for the highest temperature detectors.

  • Suits fixed temperature, rate-of-rise and combination detectors up to 194°F / 90°C
  • Quickest activation times
  • Lightweight and simple to use
  • Universal design suits widest range of detectors
  • Designed for use at height, at angles and low level
  • Supplied with 5m / 16ft cable (additional 5m / 16ft cable available)